Instructions - How to Use AirPockets

AirPockets Instructions

Follow these easy steps to install your AirPockets Pad.

Top and Bottom of the AirPockets Pad shown above.

Step 1:

Remove the adhesive-backing paper from the AirPockets Pad.

On the inside of your mask, with the self-adhesive side facing the mask, position the AirPockets Pad near the top center of the mask. Secure it in place by pressing it down onto the mask. See Fig. 1 below for the recommended placement of the AirPockets Pad on the inside of the mask.

Note: If your mask has folds in its design, smooth out the placement area before applying the AirPockets Pad.

Position the AirPockets Pad so the bottom of the AirPockets Pad extends approximately 1/4 - 1/2inch past the tip of your nose when the mask is worn in its normal position. This distance is what helps create the air pocket. See Fig. 2 below.

The self-adhesive backing will keep the AirPockets Pad in position.

Step 2:

Adjust the AirPockets Pad position as needed by removing and re-applying. When in optimal position, a space will be created by the AirPockets Pad between your mask and nasal passageway.